Airlock Lubbock Spray Foam Insulation is an insulation contractor working in Levelland, TX. We seal the leaks in your attic, walls and crawl space first, then add blown-in or spray foam insulation so the house holds its temperature better.
Levelland is the county seat for Hockley County. Past the courthouse square and the shops downtown, the town is mostly neighborhoods of single-story homes, a lot of them brick. Some have been standing for decades with whatever insulation went in when they were built, and by now it's usually thin and settled. Others are newer builds toward the edges of town, where the room over the garage is often the one that never feels right. We hear from downtown business owners too, about the buildings they work in.
Like the houses we work on in Plainview and Brownfield, a single-story Levelland home has its attic over every room. That means thin fill or open gaps around the lights and the hatch show up all through the house as drafts and a higher power bill. So most of the job happens in the attic, and I check what's already up there before we add anything.
We spray foam on the roof deck or walls so it seals air as it insulates, which is worth the extra cost when your ductwork runs through the attic.
Explore serviceWe seal the gaps first, then bring thin or settled attic insulation up to an even depth, with the edges as full as the middle.
Explore serviceBlown-in is loose fill we blow through a hose over what's already there, and it suits the open attics over most single-story homes here.
Explore serviceWhen some rooms run hot and others feel drafty, we look at the whole house so we fix the cause and not just one room.
Explore serviceWe vacuum out old insulation that got soaked or filled with droppings, because new material laid over it keeps the problem in your attic.
Explore serviceOn a house built over a crawl space, we insulate under the floor, since that's usually where cold floors start.
Explore serviceWe fill open walls during a remodel, or blow insulation into closed walls when an outside room stays uncomfortable.
Explore serviceAir sealing means closing the gaps around pipes, wires, can lights and the attic hatch, so your insulation isn't fighting a draft.
Explore serviceWhen a house has a basement or a sunken room, we insulate the walls so the space is easier to use year-round.
Explore serviceClosed-cell foam is a dense foam that also blocks moisture, so we use it in crawl spaces, metal buildings and spots where damp is the worry.
Explore serviceOpen-cell foam is softer and lighter, and it seals rooflines and walls for less than closed-cell when moisture isn't the concern.
Explore serviceWe insulate shops, offices and metal buildings in town and schedule the work around your business hours.
Explore serviceWe lay a heavy liner over the dirt floor of a crawl space so ground moisture stays out of the floor framing.
Explore serviceWhen a wall or ceiling calls for a moisture layer, we put it on the side where it keeps damp out instead of trapping it.
Explore serviceWe seal the attic floor from above, around the hatch, the lights and where the walls meet the attic, before any new insulation goes on.
Explore serviceWe add insulation to an older, finished house by working through the attic or small holes, so your walls and ceilings stay in place.
Explore serviceWhen a job in Levelland needs a permit, the city's Building Department takes the application. You pick the form that matches the project, fill it in, print it and turn it in for the department to consider. The city also inspects construction against its codes, so a permitted job waits on the city as well as on us. We're licensed and insured, and you're welcome to ask for proof when I come out for the estimate. When a job needs a permit, we get it and handle the paperwork. If I'm not sure whether yours does, I call the Building Department and ask before we start.
We drive out from Lubbock for Levelland jobs, the same as we do for Littlefield. The price turns on how big the attic is, how many inches are already up there, whether old insulation has to come out first, how many gaps need sealing and whether you want foam or loose fill. The schedule turns on the same things, plus a permit if the job needs one and any repairs that have to come first. I look at your job in person and write the estimate, so you get your own figure instead of a guess over the phone.
Tell us what you're noticing, like a room over the garage that runs hot, cold floors or a power bill that keeps climbing, and we'll reply within one business day. The estimate is free and there's no obligation. I come out myself, look at the attic, walls or crawl space and go over what I see before you decide anything.
(806) 370-4846Residential construction in Levelland has to be built to the city's standard codes and its local changes, and the city inspects construction to check. An older city guidance sheet lists the 2015 versions of the international building and residential codes, so the Building Department is the place to confirm which editions apply now. We do the work to those codes and to the material maker's instructions.
If your job needs a city permit, the city's older residential guidance lists two complete copies of an energy code compliance report, which shows how the work meets the energy code. That report goes with the permit paperwork we already take care of, so you don't have to fill it in yourself.
Usually not. With spray foam, you, the kids and the pets stay out of the house while we spray and until the foam maker's re-entry time has passed, which is the wait before it's safe to come back inside. I'll tell you that time before we start so you can plan the day. For blown-in work in the attic, most families stay home.
We're an insulation contractor based in Lubbock, TX, and we work in Lubbock and the cities around it. The cities below have their own pages. If yours isn't listed, call and ask.
We answer from 6 AM to 9 PM on weekdays and 7 AM to 9 PM on weekends, so you can call (806) 370-4846 or send the form before or after work.
If you have a question about your attic before you want an estimate, send it over and I'll answer it in plain words.
Tell us about your project
